Certification

Why trust us?

For more than 86 years we have accompanied organizations in their growth and development. Our certification marks mean for trust, quality and safety.

Certified organizations

Get to know the products and services that have our certification

Find out about our accreditations and recognitions

We can demonstrate our technical competence through our multiple accreditations and recognitions within international certification networks which are shown here below

Accreditations

Management Systems Certification Body

Personal Competencies Certification Body

Product certification body

International Peer Recognitions

Management Systems Certification Body

Product certification body

Learn about our policy of impartiality

The credibility of third party certification is based, to a large extent, on the technical competence and the objectivity of the assessment of the body performing it. To ensure impartiality in all the certification and inspection activities, we have established a policy of impartiality as a guiding principle in our actions.

IRAM statements and impartiality policy

If you have any queries or complaints relating to impartiality issues, you may contact our Committee for the Safeguarding of Impartiality: imparcialidad@iram.org.ar.

Make our marks visible and build trust

The organizations and products certified by us bring confidence and safety to consumers, who value our support when viewing the use of our prestigious and varied certification marks.

The difference between the several types of marks we have, lies in the type of certification and the attribute or quality being certified.

In order to learn in detail about the different allowed uses and scopes, we invite you to look at our procedures DC-PG 129 and DC-PG 096 .

IRAM Marks for management systems

IRAM Marks for product conformity certification

IRAM mark of conformity to IRAM standard

IRAM mark of conformity to a regulatory document

IRAM mark of conformity to a Safety standard

IRAM Marks of joint conformity with the mark of the National Department of Domestic Trade for the certifications in the regulated field

Labels for the maintenance, control and certification of fire extinguishers

Maintenance and recharge label for fire extinguishers

Regular inspection of fire extinguishers label

Fire extinguisher certification label

Joint Certification Marks

IRAM - AITA

IRAM - INTI

Illegal use of IRAM Marks on products and apocryphal documents

The reliability of our services is one of the pillars that guide our activity. Therefore, we continuously monitor the market to identify potential threats in the incorrect or improper use of our trademarks.

Below are details of cases of illegitimate use or apocryphal documents which we have detected after January 6, 2018:

Swipe right to see the full table

Product and Brand	Infringement	Additional Comments	More Info
BROKE Single-Conductor Cable 2.5 mm2 (brown) 6 December 2022	The product displays the IRAM Mark. However, the product has not been certified by IRAM and therefore, the IRAM Mark is being illegitimately used.	The certification of electrical cables is mandatory in the Republic of Argentina. Therefore, failure to do so constitutes a breach of Resolution SCI No. 169/2018. Failure of such a product to comply with the applicable standards can lead to hazardous conditions for people’s lives and damage to property, such as: risk of electrical contact due to insufficient thickness of insulating layers, excessive heating of the conductor and insulation, flame spread, among others.	View file
1.5 mm2 unipolar cable (black) AYAN	The product exhibits the IRAM Mark and "S" mark established in the exSIC&M Resolution N°799/1999; however, this product has not been certified by IRAM; therefore an illegitimate use of the IRAM Mark is being incurred. The Dirección Nacional de Lealtad Comercial has been notified by IRAM of this irregularity.	Certification of electricity cables is mandatory in the Argentine Republic; therefore, non certification of same constitutes a failure to comply with Resolution SCI N°169/2018. • Failure of such a product to comply with the applicable standards can lead to hazardous conditions for people’s lives and damage to property such as: risk of electrical contact due to insufficient thickness of insulating layers, excessive heating of the conductor and insulation, flame propagation, among others.	View file
MULTICHISPA MERAK MT-01012 Lighters	The product displays an IRAM logo on its packaging and a metallic stamp on the lighter casing, which bears an IRAM logo and the letter symbol "S" specified in Resolution exSICYM No. 799/99. However, this product has not been certified by IRAM under the Conformity Mark. This constitutes an illegitimate use of the IRAM Mark. The Dirección Nacional de Reglamentos Técnicos (National Department of Technical Regulations) has been notified by IRAM about this irregularity.	The certification of lighters is mandatory in the Republic of Argentina. Therefore, failure to comply with this certification constitutes a breach of Resolution SCI No. 77/2004. Failure of such a product to comply with the applicable standards can lead to hazardous conditions for people’s lives and damage to property such as: risk of burns, excessive heating of the product and surrounding surfaces, flame spread, injuries due to explosions or similar, among others.	View file
Electrical outlets, sockets and frames, and supplies for electrical installations - BELT (marketed by IMDIMABOL S.R.L.)	The use of "Sello IRAM" (IRAM Mark), a mark registered by IRAM, was found on several low voltage products (electrical outlets, switches, sockets and frames, etc.). However, these products have not been certified by IRAM and therefore, an illegitimate use of the IRAM mark is being made. These products have been detected in the market of the Plurinational State of Bolivia.	Failure of such a product to comply with the applicable standards can lead to hazardous conditions for people’s lives and damage to property such as: risk of electrical contact, excessive heating of the product and surrounding surfaces, flame spread, deformation of plastic parts, defective fastening of conductors, among others.	View file
2.5 mm2 unipolar section cables for electrical installations ELECTROCABLE 6 January 2020	The labelling of the respective cable reads "Sello IRAM" as a registered trademark by IRAM to identify the certified cables; however, it has not been certified by IRAM and therefore an illegitimate use of the trademark is being incurred. The Dirección Nacional de Lealtad Comercial (Argentine Deparment of Commercial Loyalty) has been notified by IRAM of this irregularity.	Certification of electricity cables is mandatory in the Argentine Republic; therefore,non certification of same constitutes a failure to comply with Resolution SCI N°169/2018. We inform that thefailure of such a product to comply with the applicable standards can lead to hazardous conditions for people’s lives and damage to property such as: risk of electrical contact due to insufficient thickness of insulating layers, excessive heating of the conductor and insulation, flame propagation, among others.	View file
Maintenance service and recharging of fire extinguishers according to IRAM 3517-2 MARCELO PARPAL 27 December 2019	Its fire extinguishers use a labelling similar to the one granted by IRAM for the Certification of the Maintenance and Recharge Service of fire extinguishers, although the firm "MARCELO PARPAL" has not obtained the corresponding certification.	The firm PARPAL SEGURIDAD INDUSTRIAL S.R.L. does have the IRAM Certification for the service of Maintenance and Recharge of Fire Extinguishers whose label is further detailed.	View file
2.5 mm2 unipolar cable (brown) ANELECTRIC 4 June 2018	The product exhibits the IRAM Mark and "S" mark established in the exSIC&M Resolution N°799/1999; however, this product has not been certified by IRAM; therefore an illegitimate use of the IRAM Mark is being incurred. The Dirección Nacional de Lealtad Comercial has been notified by IRAM of this irregularity.	Certification of electricity cables is mandatory in the Argentine Republic; therefore, non certification of same constitutes a failure to comply with Resolution SCI N°169/2018. • Failure of such a product to comply with the applicable standards can lead to hazardous conditions for people’s lives and damage to property such as: risk of electrical contact due to insufficient thickness of insulating layers, excessive heating of the conductor and insulation, flame propagation, among others.	View file
1.5 mm2 unipolar cable (black) CENTURIÓN 22 June 2018	The product exhibits the IRAM Mark and "S" mark established in the exSIC&M Resolution N°799/1999; however, this product has not been certified by IRAM; therefore, an illegitimate use of the IRAM Mark is being incurred. The Dirección Nacional de Lealtad Comercial has been notified by IRAM of this irregularity	Certification of electricity cables is mandatory in the Argentine Republic; therefore,non certificationof same constitutes a failure to comply with Resolution SCI N°169/2018.  Failure of such a product to comply with the applicable standards can lead to hazardous conditions for people’s lives and damage to property such as: risk of electrical contact due to insufficient thickness of insulating layers, excessive heating of the conductor and insulation, flame propagation, among others.	View file
1.5 mm2 unipolar cable (red) BARROW 22 June 2018	The product exhibits the IRAM Mark and "S" mark established in the exSIC&M Resolution N°799/1999; however this product has not been certified by IRAM; therefore an illegitimate use of the IRAM Mark is being incurred. The Dirección Nacional de Lealtad Comercial has been notified by IRAM of this irregularity	Certification of electricity cables is mandatory in the Argentine Republic; therefore, non certification of same constitutes a failure to comply with Resolution SCI N°169/2018.  Failure of such a product to comply with the applicable standards can lead to hazardous conditions for people’s lives and damage to property such as: risk of electrical contact due to insufficient thickness of insulating layers, excessive heating of the conductor and insulation, flame propagation, among others.	View file
Halogen stove (model E-303) EIFFEL 4 June 2018	The product exhibits the IRAM Mark and "S" mark established in the exSIC&M Resolution N°799/1999; however this product has not been certified by IRAM; therefore an illegitimate use of the IRAM Mark is being incurred. The Dirección Nacional de Lealtad Comercial has been notified by IRAM of this irregularity.	Certification of electric heating appliances is mandatory in the Argentine Republic; therefore,non certificationof same constitutes a breach of Resolution SCI N°169/2018.  Failureof such a product to comply with applicable standards can lead to life-threatening situations and damage to property such as: risk of electrical contact, excessive heating of the product and surrounding surfaces, flame propagation, deformation of casings, lack of safety devices, among others.	View file

Apocryphal documents

Swipe right to see the full table

Product/Holder of the Document	Tipe of Apocryphal Document	Remarks	Documents
Safety Footwear / GRUPO IAN DELTA S.R.L. 4 April 2023	IRAM Standard Conformity Mark License (SYSTEM 5) IRAM 3610:2015	Document data is apocryphal, it has been forged, and it is not an IRAM customer.	View file
APEZ CARROCERIAS S.R.L. 18 April 2022	IRAM-ISO 9001:2015 Management Systems Certificate.	The data in the document shown does not correspond to the certificate issued by IRAM. The certification is not in effect.	View file
Ozone generators GROMOTEL S.A. 18 August 2020	IRAM Mark License and security mark as per Resolution exSIC&M N°799/1999	The document is entirely apocryphal and the data has been corrupted.	View file
Switching power supply Shenzhen Imagine Electronics Co., Ltd. 15 August 2018	IRAM Mark License and security mark as per Resolution exSIC&M N°799/1999	The data of the document shown does not correspond to the certificate issued by IRAM	View file

Let's talk

Get in touch with us and we will answer your questions

Send inquiry

First name*

Last name*

E-mail*

Country

Province

City/Town

Company/Entity

Telephone

Motivo del contacto*

Addressed to*

how can we help you?*

I accept the Policy de Privacity and the Términos y Condiciones de IRAM Argentina